Why your lens pen leaves streaks or smudges
If you are seeing streaks, smudges, or stubborn marks after using a lens cleaning pen, the problem is usually not the pen itself but how its two ends are being used. The VSGO Lens Cleaning Pen V-P01E has a precision carbon head for fingerprints and oil stains on optical surfaces, and a soft brush for gaps around the lens and filter rims. Mixing up those roles, or expecting one end to do everything, is where most frustration starts.
The supplied product information describes the carbon head as multilayer nanoscale optical carbon that cleans fingerprints, oil stains and other stubborn stains on delicate optical surfaces. It also states that the carbon on the cleaning end will not influence imaging quality. That is the job it is designed for. The soft brush is described as fine and flexible, reaching into areas where a cloth or wipe cannot or should not go. Neither end is described as a general-purpose wipe for the whole lens.
Common mistakes and what to check instead
- Using the brush where the carbon head belongs: The soft brush is for hard-to-reach areas such as gaps around the lens and filter rims. If you are trying to remove a fingerprint or oil stain with the brush alone, switch to the carbon head, which the record describes as effective on fingerprints and oil stains.
- Using the carbon head in gaps it cannot reach: The carbon head is described for optical delicate surfaces. For recessed edges and rims, the flexible brush is the end designed to reach where a cloth or wipe cannot. Trying to force the carbon head into those areas is a common source of missed spots.
- Assuming the pen is failing when the surface is the issue: The record does not describe the pen as a treatment for every kind of mark. It specifically lists fingerprints, oil stains and other stubborn stains on optical surfaces. If a mark is not improving, check whether it fits that description before concluding the pen is not working.
- Losing the cap and exposing the heads: The V-P01E has an innovative protective cap that covers both the brush head and the carbon head, and a cap holder designed to prevent the pen from falling off accidentally. Using that holder keeps the cleaning ends protected between uses.
What the V-P01E record confirms
- Lens Cleaning Pen V-P01E: Precision carbon head with multilayer nanoscale optical carbon for fingerprints, oil stains and other stubborn stains on optical delicate surfaces. This is the end to reach for when the problem is a smudge or fingerprint, not dust in a gap.

Lens Cleaning Pen V-P01E - Lens Cleaning Pen V-P01E: Soft brush head designed for hard-to-reach areas such as gaps around the lens and rims of filters. Explains why a brush-only pass can leave the main lens surface untouched, and why a carbon-only pass can miss edges.
- Lens Cleaning Pen V-P01E: Double-ended design compatible for cleaning camera lens, optical lens and glasses, telescopes and other optical products. Sets the intended scope so you can judge whether your lens or surface is the right match.
- Lens Cleaning Pen V-P01E: Innovative protective cap protects the brush head and carbon head and is easy to carry; the cap holder is designed to prevent the pen from falling off accidentally. A simple storage habit that keeps both cleaning ends ready and reduces the chance of losing the pen.
A practical way to use both ends
Start by identifying the problem. If the mark is a fingerprint or oil stain on the glass itself, the carbon head is the end the record describes for that job. If the issue is dust or residue sitting in the gap between the lens and its rim, or around a filter edge, the soft brush is the end designed to flex into that space. Using them in that order, rather than repeatedly working one end over the whole lens, matches how the V-P01E is described.
Keep the protective cap on when the pen is not in use, and use the cap holder so the pen stays with your kit. The record does not supply step-by-step cleaning instructions, drying times, or a recommended number of passes, so treat any specific technique beyond the described roles of the two heads as your own judgment rather than a manufacturer procedure.
When the pen is not the right fix
The supplied information does not confirm that the V-P01E removes every type of contamination, and it does not describe compatibility with sensor surfaces or wet cleaning. If a mark persists after using the carbon head on an optical surface, or if the problem is inside the camera rather than on the lens, the lens pen may simply not be the tool for that job. In that case, stop and use a method intended for the surface you are actually cleaning rather than pressing harder with the pen.
The record also does not state a replacement interval or a cleaning procedure for the pen heads themselves. If the carbon head or brush appears to be the source of a new smudge, that is a sign to set the pen aside rather than keep working the lens.

